Download Catalogue Flush Head Actuator : Mushroom Head Actuator ‘Push Function’ : Selector Actuators : Enclosures :

Technical Specifications :

Degree of Protection : Ingress Protection IP65 for Push Button Station with Indicators / Non Illuminated Push Function Actuators & all Purpose Enclosure. safety: Fully insulated to house electrical and electronic equipment with respect to protection against electrical shock. Materials : Base : Tough, impact resistant, ABS Cover : Tough, impact resistant, ABS Cover Screws: Slotted head, metal screws for Push Button Stations and tough, low friction PA6 captive cross slot head screws for all purpose enclosures. Gasket : Oil and acid resistant nitrile rubber. Terminal Capacity : 1 to 2.5 mm square flexible wire Mounting : Directly through base, in cover screw cavity, outside gasketted area with No.4 size, sheet metal screws. Machining : Machining is easy with normal tools. Enclosures can be drilled, sawed, filed, punched etc. They can be welded with ultrasonic equipment.     Dimensions :     1 Station 2 Station 3 Station 4 Station Base size mm 74 x 70 107 x 70 140 x 70 110 x 80 Cover Depth mm 16.50 16.50 16.50 20.00 Base Depth mm 32.00 30.00 32.00 45.00   Maintenance :   Do not need any particular maintenance. If necessary, soap and water can be used for cleaning. If detergent is used, enclosure should be rinsed well with clean water. Do not use any solvents to clean the enclosures.   Chemical resistance :   ABS products are almost completely resistant to aqueous acids, alkalis and salts. Concentrated phosphoric and hydrochloric acids have little effect. Low KB solvents, alcoholsand animal / vegetable / mineral oils produce insignificant changes. Aromatic or chlorinated hydrocarbons and high KB solvents cause marked swelling. Esters Ketones and Unsaturated alkalis are solvents for ABS and should not be used.   Chemical resistance :   Long term exposure to temperatures above 70oC should be avoided. No significant change in impact strength is noticed up to -20oC.

Salient features :

Push Button Stations     ABS Engineering plastic material resistant to ageing, impact, corrosion & non conductive to heat unlike metal enclosures.     Fire Retardant.     Robust & Total maintenance free     Specially designed base mounted contact block & bulb holders for easy wiring & termination     International Approvals CE, CSA, UL, VDE, ‘S' mark for contact blocks & CE, CSA, UL & VDS for bulb holder.     IP 65 ingress protection     Fully insulated to house electrical & electronic equipment with respect to protection against electrical shock.     Temperature Resistance from –20 º C to 70 º C.