| |
|
| |
|
| |
| |
| |
|
|
| |
|
|
| Single Station Mashroom Head Push - Pull Shrouded : |
|
|
|
|
| |
| Single Station Mashroom Head Push - Turn Shrouded : |
|
|
| |
|
| |
| |
| |
|
|
|
|
| |
|
|
|
| |
|
| |
VDE, CE Electrical Ratings (IEC 60947-3, IEC 60947-5-1, VDE 0660 Part 200, IEC 60947-3, IEC 60947-5-1) |
|
|
| |
| Alternating Current |
| Rated Operational Voltage (50-60 Hz) |
|
V |
110 |
230 |
440 |
500 |
| Rated Operational Current (IEC 60947-3) |
AC21 |
AMP |
16 |
14.0 |
11.0 |
10.0 |
| Rated Operational Current (IEC 60947-5-1) |
AC15 |
AMP |
8.0 |
6.0 |
3.0 |
2.0 |
|
| Direct Current |
| Rated Operational Voltage |
|
V |
24 |
48 |
110 |
220 |
| Rated Operational Current (IEC 60947-5-1) |
DC13 |
AMP |
1.5 |
1.0 |
0.3 |
.02 |
|
|
|
|
| |
UL, CSA Electrical Ratings (CAN/CSA-C22.2 NO 14-M91, UL 508) |
|
|
| |
| Contact Rating |
Thermal est Continuous
|
Maximum Current |
Maximum VA |
| Code Designation,AC |
Current,Amp |
|
|
| A 600 |
10 |
|
|
|
|
|
|
|
| |
| Contact Rating Code |
Thermal Continuous Test
|
Maximum Make & Break Current, Amp |
Maximum Make & Break
|
| Designation, DC |
Current, Amp |
|
at 300 V or less, VA |
| P 300 |
5.0 |
|
138 |
|
|
|
| |
| Electrical Life at 230V, 50-60Hz, AC, utilisation category AC21 to IEC60947-3 |
| Rated current |
Operations |
| AMPS |
(x106 )
|
| 6 |
0.5 |
| 2 |
1 |
|
|
| Degree of Protection : |
IP 65 |
| |
IP67 with rubber / vinyl shroud |
|
| Operational Temperature Limits (without shroud) |
Non-illuminated
|
Illuminated
|
| -30 to+60C |
-30 to + 40oC
|
| 6 |
0.5 |
| 2 |
1 |
|
|
| Rated Insulation Voltage |
600 V AC.
|
|
| Dielectric / H. V. Test Voltage at 2.5 KVAC FOR 60. Sec. |
|
| Rated Thermal Current |
16Amp with, 2.5mm2 flexible conductor |
| Mechanical Life |
1 x 106 operations |
| Terminals |
Suitable for flexible or solid
conductors from 2 x 1 mm2 |
Disposition of Contacts for Modular Blocks
|
|
|
 |
|
|
| |
|
|
|
|
|
|
| Salient features : |
| |
 |
ABS Engineering plastic material resistant to ageing, impact, corrosion & non conductive to heat unlike metal enclosures. |
|
Fire Retardant. |
|
Robust & Total maintenance free |
|
Specially designed base mounted contact block & bulb holders for easy wiring & termination |
|
International Approvals CE, CSA, UL, VDE, ‘S' mark for contact blocks & CE, CSA, UL & VDS for bulb holder. |
|
IP 65 ingress protection |
|
Fully insulated to house electrical & electronic equipment with respect to protection against electrical shock. |
|
Temperature Resistance from –20 º C to 70 º C. |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
| Gen Next Push Button Station: |
|
|
|
|
| |
|
| Technical Specifications : |
|
|
|
| 1. Degree of Protection : IP 65 for Push Button Enclosure with Indicators & Actuators |
|
| 2. Safety : Fully isulated to hose electrical & electronic equipment w.r.t. protection against electric shock. |
|
3. Material :
| |
Bottom Cover : Tough, Impact resistant & fire retardant ABS.
Top Cover : Tough, Impact resistant & fire retardant ABS.
Gasket : Nitrile rubber, which is good resistant to Oil & acids.
Screws : Half threaded Self tapping Cold Forged Screws with blacodising. |
|
|
| 4. Dimensions: |
|
| Type of Enclosure |
Single |
Two |
Three |
Eight |
| Size in mm (Length, Width, Depth) |
65x55x33 |
100x55x53 |
134x55x53 |
305x55x53 |
|
|
|
Screw Size for wall Mounting : M3.5 mm Insertion of Screws directly through base cover.
Maintenance: Do not need any particular maintenance. If necessary, soap, and water can be used for cleaning. If detergent is used, enclosure should be rinsed well clean water. Do not use any solvents to clean the enclosures.
Chemical resistance : ABS Products are almost completely resistant to aqueous acids, alkalis and salts, Concentrated phosphoric and hydrochloric acids have little effect. Low KB solvents, alcohols and animal / vegetable / mineral oils produce insignificant changes. Aromatic or chlorinated hydrocarbons and high KB solvents cause marked swelling. Esters ketones and unsaturated alkalis are solvents for ABS and should not be used.
Temperature Range: Long term exposure to temperatures above 70OC should be avoided. No significant change in impact strength is noticed up to-20OC. |
| |
|
|
| |
|
| Salient features : |
|
|
Applications : |
|
|
|
Sleek, Compact & Unique design |
|
Rounded ergonomic Enclosure |
|
Good Aesthetics, occupies less space |
|
Easy to grip, assemble & operate |
|
Robust & maintenance free |
|
Special fire retardant engineering plastic used to make it Light, corrosion resistive & non-conductive to heat |
|
Comply with safety IEC standards with IP65 Ingress protection |
|
Available range of Enclosures: Single, Two, Three, Four, Six & Eight Station |
|
Indoor & Outdoor use |
|
Available in standard configuration of Actuators & LED Indicators |
|
|
|
|
|
|
Cranes. |
|
Sawing Machines. |
|
Rice Mills. |
|
Mining Applications. |
|
Sewing Machines. |
|
Distribution Boards. |
|
Panel Mounted Valves. |
|
Motor Starters. |
|
Refineries. |
|
Palm switch. |
|
Piping Applications |
|
| |
|
|
|
|
| Note : |
| 1. |
Mentioned products are available as ex-stock, for any special requirement please contact us.
|
|
| |
|
|
|
Gen Next Range of Products  |
|
|
| Standard Range of Products |
|
|
| Appliance Switches & Sockets |
|
|
|
|
|
|
|
|
|
| Products For Elevators |
|
|
| Limit Switches |
|
|
|
|
|
|
Other Products
|
Download Catalogue
Gen Next Actuators &